Anyone know anything about ACorp mobos

I have a ACorp 6via96a, anyone know how this board rates against other boards?. I bought it wihout much research and i havent seen anything about acorp since. This is the first computer im building and id like to run it good before overclocking it.

specs on the mobo are: http://www.acorp.com.tw/Common/Product/Product.asp?SN=42

Processor: Slot1/Socket 370 Intel PII/PIII (133MHz) and Celeron / Coppermine CPU

Chipset: VIA 694X + 686A (VIA APOLLO PRO133A)
Bus CLK: 66 / 100 / 133
Bus Architecture:
1 x AGP 4X
4 x PCI slot
1 x ISA slot
1 x AMR slot (Audio Modem Riser)

System Memory: 3 x 168 pin DIMM sockets up to 1.5GB
USB Support: 2 USB connectors (2 USB channel for 4 USB ports)
BIOS: Award BIOS with ACPI, GREEN, PNP and Trend Chipaway Virus(R) on guard protect (Flash ROM for easy upgrade)

DMA Support: Support Ultra DMA 33 / 66 2 Bus Master IDE ports (up to 4 IDE devices)

Power Support: ATX Power Connector Support
On board I/O:
PS/2 keyboard and mouse
2 Serial ports
1 Parallel port (SPP / EPP / ECP)
ATX double decker for I/O connectors
Support IrDA TX / RX header

Multimedia on Board: AC ' 97
Board Size: 30.5cm x 24.5cm (ATX Form)

right now im running:
Win 98SE
Win2K Pro

with

866 PIII slot1
128 Kingmax TinyBGA ram
15 GB Western Digital HD (5400RPM i think)(i found this in lying around my room and im gonna change it.)
Some old 36x CDrom (im gonna get rid of that and put a cd-rw)
ATI All-in-Wonder Radeon 32 DDR

If anyone knows anything about this, please tell me. thanks

[sbp]

I've never heard of ACorp motherboards. Since you bought the motherboard use it and see how it performs. Most likely it will perform just fine.

so far its running good, i have win 98 se running flawlessly and win 2k running ok (ive gotten some BSODs , but i think win2k is just that way. ill have to wait and see how the ocing goes i havnt over clocked it yet.