PDA

View Full Version : This Engine Could Have A Very Bright Future



johnnymk
08-21-2007, 09:51 PM
http://www.popsci.com/popsci/technology/c1609351d9092110vgnvcm1000004eecbccdrcrd.html

After a lifetime of making racecars go faster, Bruce Crower's new engine uses steam to squeeze more mileage from gas

Bruce Crower's Southern California auto-racing parts shop is a temple for racecar mechanics. Here's the flat eight-cylinder Indycar engine that won him the 1977 Louis Schwitzer Award for racecar design. There's the Mercedes five-cylinder engine he converted into a squealing supercharged two-stroke, just "to see what it would sound like," says the now half-deaf 77-year-old self-taught engineer.

Crower has spent a lifetime eking more power out of every drop of fuel to make cars go faster. Now he's using the same approach to make them go farther, with a radical six-stroke engine that tops off the familiar four-stroke internal-combustion process with two extra strokes of old-fashioned steam power.

A typical engine wastes three quarters of its energy as heat. Crower's prototype, the single-cylinder diesel eight-horsepower Steam-o-Lene engine, uses that heat to make steam and recapture some of the lost energy. It runs like a conventional four-stroke combustion engine through each of the typical up-and-down movements of the piston (intake, compression, power or combustion, exhaust).

But just as the engine finishes its fourth stroke, water squirts into the cylinder, hitting surfaces as hot as 1,500°F. The water immediately evaporates into steam, generating a 1,600-fold expansion in volume and driving the piston down to create an additional power stroke. The upward sixth stroke exhausts the steam to a condenser, where it is recycled into injection water.

Crower calculates that the Steam-o-Lene boosts the work it gets from a gallon of gas by 40 percent over conventional engines. Diesels, which are already more efficient, might get another 5 percent. And his engine does it with hardware that already exists, so there's no waiting for technologies to mature, as with electric cars or fuel cells.

"Crower is an innovator who tries new ideas based on his experience and gut instincts," says John Coletti, the retired head of Ford's SVT high-performance group. "Most people won't try something new for fear of failure, but he is driven by a need to succeed." And he just might. Crower has been keeping the details of his system quiet, waiting for a response to his patent application. When he gets it, he'll pass off the development process to a larger company that can run with it, full-steam.

InfiniteNothing
08-21-2007, 10:18 PM
I keep hearing about these six strokes and eagerly await. Of course, I can see a number of technical problems with having water in your engine :) You're going to need some pretty strong materials to harness that much force from the steam too. I imagine pitting and cracking to be common problems.

uncledaddy
08-21-2007, 11:06 PM
In the California smog program we as Smog Techs used to introduce a small steady stream of water through Carburetor air horns, as engine was running, to allow steam to clean carbon buildup thereby reducing HC emissions.

I think the only problem would be from maybe a leaking water injector and maybe hydro lock. :shrug:

Houdini
08-21-2007, 11:36 PM
I've read about similar things over the past year or so. Nifty idea, capturing pure heat energy and doing something useful with it besides heat the car.

H

mechmike0034
08-22-2007, 07:04 AM
In the California smog program we as Smog Techs used to introduce a small steady stream of water through Carburetor air horns, as engine was running, to allow steam to clean carbon buildup thereby reducing HC emissions.

A carboned-up engine would sure run better after applying a little water. In the pre-politically correct days we referred to that procedure as an "Italian tune-up"...

Half a six-and-a half ounce Coke bottle (remember those?) of water metered via your thumb into the carb while the engine was fully warm and running at at fast idle followed by a couple of idle-to-redline blasts through the gears on the open road.

If it was really loaded up you could see the brown and black cloud behind you in the rearview mirror the first time you really nailed the throttle.

Bruce Crower always has been quite the innovator. He's right up there talent-wise with Smokey Yunick and Red Vogt in my book...

Here's another article (http://www.autoweek.com/apps/pbcs.dll/article?AID=/20060227/FREE/302270007/1023/THISWEEKSISSUE) on this from Autoweek...

Prngr44
08-22-2007, 07:20 AM
Thanks for the article. I hadn't heard about these. Sounds like a heck of an engineer.

johnnymk
08-22-2007, 07:40 AM
Here's another article on this from Autoweek...

He isn't using a radiator, but he hasn't had results with a load. I am wondering whether he should still use a small radiator to moderate the temperature within the block and heads.

BTW, I recall Smokey building a motor for Chrysler Corp about twenty years ago. It appeared to be revolutionary, but it just seemed to die on the vine.

Also, FWIW, I have a '79 Mustang Pace Car with a turbocharged 4 cylinder engine -carbureted. This engine just loves high humidity conditions.

Markel
08-22-2007, 07:48 AM
He's right up there talent-wise with Smokey Yunick...
I used to drive past "The Best Damn Garage in Town" when I lived in Daytona Beach. He was a legend.

mechmike0034
08-22-2007, 10:30 AM
BTW, I recall Smokey building a motor for Chrysler Corp about twenty years ago. It appeared to be revolutionary, but it just seemed to die on the vine.

Also, FWIW, I have a '79 Mustang Pace Car with a turbocharged 4 cylinder engine -carbureted. This engine just loves high humidity conditions.

Blog post (http://www.automotiveblogger.net/150-hp-50-mpg-two-cylinder-engine) on Smokey's "adiabatic" engine, along with a followup (http://www.automotiveblogger.net/followup-to-the-smokey-yunick-fiero)...

http://www.circletrack.com/techarticles/ctrp_0707_09_z+racing_science+smokey_yunick.jpg

uncledaddy
08-22-2007, 11:11 AM
Half a six-and-a half ounce Coke bottle (remember those?) of water metered via your thumb into the carb while the engine was fully warm and running at at fast idle followed by a couple of idle-to-redline blasts through the gears on the open road.


Yup....and customer thought you were a genius. :)