View Full Version : New to Overclock Celeron 2 633
12-29-2000, 08:16 PM
I am wanting to overclock my Celeron 2 633. I have msi 6309 motherboard which i heard was good for overclocking. Wanting to know how much to overclock my processor to so that it would be stable and if anyone has overclocked this kind of motherboard could tell me how to do it. I am also wanting to know what i would need to overclock the processor. Also wanting to know what is the fastest celeron of the market.
01-03-2001, 09:38 PM
I have the same mobo, and yes, it is good for overclocking.
Make sure you have a good heatsink/fan before overclocking.
Here's what you want to do in the Bios:
-Make sure memory bank interleaving is set to 4-way
-Set CPU voltage to 1.7
-Set bus speed to 90 (9.5x90Mhz=855Mhz)
-Save and exit
-Test it out for awhile. Run games and such to test stability.
-If it's stable at 90, try 92.5, then 95, then 100. Don't worry if you can't reach a 100Mhz bus (950 Mhz), as you'd be quite lucky.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.