Need a recomendation for a Slot 1 motherboard

[Grimm]

I have a Pentium III 733Mhz processor with a 133 fsb.
I need a recomendation on a good inexpensive motherboard to use with this CPU.

[joe52985]

mine, send it over, ill put it in....good home

[Grimm]

I'll send you my old PII 266 instead. (not really, I just want your address so I can come over and slap you)

i dont know what you consider inexpensive, but in my opinion, the asus p3v4x is one of the best slot 1 mobos out there.

[Hiro]

IWill boards are good.
cheap and effective.

[Grimm]

Thanks, I found a solution to my problem. I am using an old board that, after a bios upgrade, I was able to run the cpu underclocked by 25%. It works well enough.

[billxp]

Underclocking a CPU??

Isn't that like a SIN!!!! :)

[Grimm]

It's EVILcyclops for a reason bud.

[Grimm]

Now that I have some time I will try to bring it up after replacing the pc100 ram with pc133. I think I have a 64mb stick laying around. If it works I will buy more. The motherboard doesn't support 733 Mhz but I'll see what I can get. I just needed to get it up and running before the 5 day return period expired on the CPU (reasonable considering the low, low prices they charge). If something was wrong with the CPU I needed to know. But it was only my motherboard. An Abit BH6. It did realy well with my Celly 300@450.

[Grimm]

Well, if you have something to trade for the BH6, something that can run the PIII 733 at 133mhz front side bus and works ok. We could work out a trade.