itzlvx
08-01-2001, 08:07 AM
My Maxtor 40gb 7200rpm is really hot and comps locks up and freezes sometimes.
Seems as if when I'm playing game it works fine. However when I start chatting or doing misc things, it locks up. I check to see if the cpu is overheating but i'm feeling the chip and heatsink and fan, it feels normal. But my 40gb hard drive is hot.
I run the game using virtual cd rom off of the 40gb hard drive. I'm thinking the hard drive is overheating and causing the lock ups. But it never locks up when i'm playing the game (which is a good thing).
I have another main hard drive 10gb 7200 maxtor but that one isnt hot. Why is it specifically that one that is over heating?
I'm running
Tyan S2390B w Tbird 1.2 266FSB w/ coolermaster heatsink and fan
512 ram
nvidia geforce2 64mb
win2k
300w ps
maxtor 10gb 7200 rpm (primary master)
maxtor 40gb 7200 rpm (secondary master) <- hot
acer cdrw (primary slave)
creative dvd rom (secondary slave)
netgear nic
uhmm anything else needed?
I recently upgraded the board/chip/fan from my old tyan board with overclocked 700mhz athlon.
I'm using the same hardware so I never bothered to do a complete format of the hard drives. Since both boards are the similar I didnt bother. Could this be the problem?
Thanks
lvx
Ps. I leave the cover off from the tower.
2ps. This is my first post. Hello alls.
Seems as if when I'm playing game it works fine. However when I start chatting or doing misc things, it locks up. I check to see if the cpu is overheating but i'm feeling the chip and heatsink and fan, it feels normal. But my 40gb hard drive is hot.
I run the game using virtual cd rom off of the 40gb hard drive. I'm thinking the hard drive is overheating and causing the lock ups. But it never locks up when i'm playing the game (which is a good thing).
I have another main hard drive 10gb 7200 maxtor but that one isnt hot. Why is it specifically that one that is over heating?
I'm running
Tyan S2390B w Tbird 1.2 266FSB w/ coolermaster heatsink and fan
512 ram
nvidia geforce2 64mb
win2k
300w ps
maxtor 10gb 7200 rpm (primary master)
maxtor 40gb 7200 rpm (secondary master) <- hot
acer cdrw (primary slave)
creative dvd rom (secondary slave)
netgear nic
uhmm anything else needed?
I recently upgraded the board/chip/fan from my old tyan board with overclocked 700mhz athlon.
I'm using the same hardware so I never bothered to do a complete format of the hard drives. Since both boards are the similar I didnt bother. Could this be the problem?
Thanks
lvx
Ps. I leave the cover off from the tower.
2ps. This is my first post. Hello alls.