Ahhhh SDram problems!!!

[Xrevision]

yes i recently removed the sdram from my MB and put it back, now when i boot up i only have 128 when i have 192 installed, 1 stick of 128 and 1 stick of 64, i skipped the cmos error and now i dont know how to get back to set my ram as it should be.

[qmanchu]

Try testing each stick in your motherboard individually. If they each show up during POST, try installing them together using only the first two RAM slots. Pay attention to any error messages that pop up and try not to be so quick to dismiss them. Good luck. :)

[Speedfreak]

What kind of board is it?

[Xrevision]

its an intel 810 motherboard, the celron oen.

[Speedfreak]

Brand?

[Xrevision]

wel this may help, it only seems that this problem occurs in 1 slot of my 2, if i switch them 1 side works, while the other doesnt, but i came up with a temperary solution.. a stick of 256

[Speedfreak]

Are the 128 and 64 the same brand. Some mobos don't like it being different.

[Xrevision]

it was working before, but after i pulled em out and put them back in they stopped working