View Full Version : windows install problem
twest17
11-28-2001, 05:04 PM
I tried to install windows (I tried 98se and XP) but after i put the CD in and it tried to load it it says Failure: invalid system disk, insert new disk and press any key. Any ideas how to make it work?
Dave_7
11-28-2001, 06:08 PM
Have you formatted your Hard Drive yet?
Dave.
Dave_7
11-28-2001, 06:11 PM
Oh, yes... also check the "boot order" in the BIOS. Make the CD drive the first device... until it's loaded... then switch it to CD, Floppy, HD.
Dave.
MusashiM
11-28-2001, 08:37 PM
Also, make sure there is no disk in the floppy drive, unless it is the boot disk.
I seem to remember having this problem in the past, but I can't remember what was wrong. You might also want to check the hardware, esp. the ide cables.
twest17
11-28-2001, 08:50 PM
I already formatted my HD, I have CD as the first boot device, and I don't have a floppy in, and it still doesnt work
nhbilly
11-28-2001, 10:36 PM
1st of all try booting the disk on a diffrent computer to see if it does work.
next I would try swapping new IDE cable.
98SE does not boot from disk XP does
if evything else fail try this http://bootdisk.com/ - make bootup floppy:D
DoPeY5007
11-28-2001, 11:04 PM
Originally posted by nhbilly
98SE does not boot from disk XP does
Win98 CD is a bootable CD ( mine is ) :D
nhbilly
11-28-2001, 11:19 PM
thanks dope, I stand corrected now......
so you made it bootable or it came bootable?
DoPeY5007
11-28-2001, 11:22 PM
Originally posted by nhbilly
thanks dope, I stand corrected now......
so you made it bootable or it came bootable?
;)
no it is a Win98 cd from MS retail... I am not sure where it came from though... I got it from work
nhbilly
11-28-2001, 11:51 PM
I wouldn't have known WIN98 was bootable....now I do.:eek:
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.