HSF For the Back of a Gainward Geforce4 Ti 4600

[skynet]

Hi,
I am waiting for my Gainward Geforce 4 Ti4600 to come in the mail. In the mean time I wanted to get a HSF for the back side of the card.
http://www.tbreak.com/hard/grfx/gainward_ti4600/bigback.jpg
Any recomendations? I was thinking an orb with thermal tape.
-Thanks

[skynet]

Ok Well Chrome Orb it is. Now about attaching it. If I put it on the back of the card, where all the little sodered ends are, will it short out the card? I want to use thermal goop and epoxy to make it stick, but I dont want to kill this card.

[LPMiller]

bad idea...I'd think you'd be better off with thermal tape, or clipping it on somehow.

[xsiled2]

it not really nessassary to have ram sinks, one good hs/f on the core should do the job

[skynet]

Well Firstly, the ramsinks come standard on the card. Second, I am talking about puting a HSF on the BACK of the core. The reason I am saying this is because all the reviews I have read stated how hot this chip runs. One or two of them said the back of the card ran rather hot too.
I put everything i buy to the limit plus a little bit. So I want to just go the extra mile and make sure everything runs not good, but great.

[LPMiller]

well, if you are overclocking, What I have done is aim a nidac fan towards the back of the card. I just don't like making random metal contacts on the back of my 400 buck video card.

Otherwise, I'd think thermal tape would be good enough for this application.