anybody own an Eagle Summit?

[BigJon]

If so, after pulling off the calipers...how are the rotors attached? Do they just fall off? Are they held on by alignment screws? Do you have to back the hub nut off to get it off? I need to know if this is going to be an easy or hard job...

[Nanotech9]

in general....

most rotors have a little counter-sunk bolt that holds the rotor in place to the hub... When you bolt the wheel on, thats what REALLY holds the rotor in place.

you Shouldnt have to loosten the hub nut - thats a no no.

you will PROBABLY have to use a hammer and a block of wood to tap the rotor off the hub once you've removed the little bolt that holds it in place...

last time i did rotors, i had to tap pretty hard to get them off.