PDA

View Full Version : Netgear WGT 624 problem


_=DeltaForce=_
06-15-2005, 09:11 PM
If I pluggin a Ethernet cord in my 2nd Lan port in the router, The router is restarting every 1 min.. I have no idea why it does that.. But If I plug it in 1st lan port, everything is fine and its stable...
Has anyone used the Belking Pre-N router?? Is it pretty good? Can I use a Regular Wireless G card with that and also can I use my PDA which is 802.11b with that?

Thanks!
seqiro
06-15-2005, 11:01 PM
A quick google searched turned up some other people having similar problems. You could try upgrading to the latest firmware: http://kbserver.netgear.com/products/WGT624.asp
bbrian
06-17-2005, 09:40 AM
I've got the same router and different versions of the firmware do help, but I wonder if you don't have a defective router since your problems seems to be port specific.

There were some early releases that would cause my router to reboot every 5 minutes if the WAN side was connected. It was really annoying. I'm using 4.2.4 now.. 4.2.6 causes reboots for me.

also, make sure you get the right firmware for the right version of the wgt624, there's three versions of hardware now:
http://kbserver.netgear.com/products/WGT624.asp