|
|
#1 |
|
Commander
![]() ![]() ![]() ![]() ![]() |
hard drive use yields distorted sound
it appears as if my hard drives are causing some sort of interference with my sound card. whenever data is being written to the harddrive and I'm listening to music it starts to get distorted and fuzzy, but as soon as that hard drive light turns off the distortion leaves... I actually first noticed this when I was running benchmarks to see how much performance loss would occur while playing mp3's in the background.... I'm running two 40gb western digital caviar drives on raid 0 and have a soundblaster audigy soundcard if that can help any of you think of a solution
__________________
Facebook me if you so desire. Guns don't kill people. Chad Greenway kills people. |
|
|
|
|
|
#2 |
|
Lieutenant Commander
![]() ![]() ![]() ![]() Join Date: Feb 2000
Location: Vancouver
Posts: 905
|
Try turning the line in and mic off in the volume panel and see if the noise goes away.
__________________
YVAN EHT NIOJ |
|
|
|
|
|
#3 |
|
Commander
![]() ![]() ![]() ![]() ![]() |
no dice
it's weird though cuz i have a third hard drive that doesnt cause any interference |
|
|
|
|
|
#4 |
|
Captain
![]() ![]() ![]() ![]() ![]() ![]() Join Date: Sep 2000
Location: You can’t get there from here, USA
Posts: 1,797
|
You could try moving the ribbon and power cable in your pc as far away from your sound card as possible. They may be giving off electronic interference, epically if the cables are not insulated well
You could also check and see if your sound card has wiggled loose from your PCI slot, I had that happen to a video card once. If the card is not in there snug the vibrations from your HD’s running may cause it to move and cause distortion. Or of you have moved your pc recently and you don’t have the card screwed down to the case it may have came loose as well. Could also try moving your sound card to another PCI slot further away from your HD’s Other than that I can’t think of anything else you could do except borrow another sound card from a friend or another pc and see if mybe your sound card is just having issues. |
|
|
|
|
|
#5 |
|
Admiral
![]() ![]() ![]() ![]() ![]() Join Date: May 2000
Posts: 5,064
|
Do you use round IDE cables? If your cables are the issue (I doubt it though) round cables produce a reduced magnetic field because they induce a reverse field in the closer wires that are recieving data.
Most likely, something is amis with your motherboard. I've had this issue before, but only with on-board sound. The only other recommendation I can make is to move your sound card to a different PCI slot (perhaps the last one), and make sure that it is not sharing an IRQ with your RAID card. In fact, make sure NOTHING is sharing and IRQ with your RAID card.
__________________
Five years... |
|
|
|
|
|
#6 | |
|
Captain
![]() ![]() ![]() ![]() ![]() ![]() Join Date: Sep 2000
Location: You can’t get there from here, USA
Posts: 1,797
|
Quote:
![]() Did you even read my post before you posted? |
|
|
|
|
|
|
#7 | |
|
Admiral
![]() ![]() ![]() ![]() ![]() Join Date: May 2000
Posts: 5,064
|
Quote:
Yep. And you missed the point. The *distance* may not be the issue. The problem may lie with the sound card sharing a data channel with another device, so the mobo's bus has to regulate the traffic. If the sound card is isolated on its own IRQ, this reduces problems. But, your idea about moving them for space...was a good idea too...maybe |
|
|
|
|
|
|
#8 |
|
Commander
![]() ![]() ![]() ![]() ![]() |
thanks for the response guys. that icq problem might be the cause, and would also explain why sisoft sandra wont load (it goes to a blue screen and says to check my hardware config), so I'll move around the sound card so it picks up a new icq and see how that works.
|
|
|
|