03-09-2000, 08:32 PM
|
#1 |
|
Ensign
Join Date: Jan 2000
Posts: 20
 |
I am building a new AMD athlon system with and FIC SD11 mobo, when I turn it on,it starts up,but nothing comes on the moniter,I belive I have everything hooked up right,what would cause this?
|
|
|
|
03-09-2000, 08:47 PM
|
#2 |
|
Lieutenant Junior Grade
 Join Date: Dec 1999
Location: Reedley, California, USA
Posts: 191
|
Do you have a PC speaker plugged into the Motherboard? If you do, is it making any beeps and how many?
Something you might want to try is remove all the components from the computer except for the CPU, RAM, and Video card. That shortens the list of components that could be causing the problem for you. Fuz -------------- -A day without killin' is like a day without sunshine. |
|
|
|
|
03-10-2000, 01:18 AM
|
#3 |
|
Ensign
Join Date: Jan 2000
Posts: 20
|
Yeah I have the PC speaker plugged in,it doesnt beep at all,I hit the power switch and the fans and hard drive start up and then it just sits there..no video display either.Think the mobo is jacked?
|
|
|
|
|
03-10-2000, 03:19 PM
|
#4 |
|
Lieutenant Junior Grade
Join Date: Dec 1999
Location: Reedley, California, USA
Posts: 191
|
I would guess that either the mobo is bad, or it is grounding out on the case somewhere. It is still possible that it is the other hardware in the computer (cpu-ram-video), but very unlikely since you are not recieving any beep codes.
Fuz ------------------ -Do we have any sort of plan? -Ride `till we find them, then kill them all. |
|
|
|
|
03-19-2000, 11:50 PM
|
#5 |
|
Plebe
Join Date: Mar 2000
Posts: 3
|
It could also be your powersupply athlons don't like anything less than 250
|
|
|
|
Linear Mode
