--= Multiplier PrObLeM? ==--

[jwh2oo2]

850 Tbird --> L1 bridges connected w/ 7H graphite
Abit KT7-Raid
FOP38 cpu fan

My multiplier has a mind of it's own when I try to change it. For example when it's at the stock 8.5x (for the 850 chip)
it runs at 8.5x. But if I change the bios setting to 9x or 9.5x... after rebooting, the system runs at 7x and 7.5x.
When I put it up to 10.5x, it hangs and I have to pull the motherboard battery to reset it. Don't know why it does
that either.

Do I need to change the do anything to voltage settings? My system oc's via the FSB no problem, but there's the normal PCI/AGP distortion after getting too high...

I read that other people also have the same
problem, but I don't know what the solution to it is...

can you give me a fix for this? i'm stuck... =(

HeLp!!!

[hapoo]

JusT OnE QuEstIon, wHy ThE hELl dO PeoPLe TyPE liKe ThIs????

[sbp]

there's a faq here: http://www.apushardware.com/faqs/kt7faq/kt7faq.htm

http://www.kt7raid.com/ has forums

My suggestion is you repencil the bridges again.

[revil]

Originally posted by hapoo
JusT OnE QuEstIon, wHy ThE hELl dO PeoPLe TyPE liKe ThIs????

Because their gentiles are inadequate.