We need to start a thread with experiences with this RAM.
How far could you get it at Cas 2 and 3 settings?
We need to start a thread with experiences with this RAM.
How far could you get it at Cas 2 and 3 settings?
[email protected]
256MB Crucial PC133 CAS2
ATI Radeon 64MB TIVO @ 205/205
Lian Li PC-60 Aluminum Case
Enermax EG451-VE
and...
A Intel Pro/100+ NIC...get yours here: http://home.adelphia.net/~ivanlau/ethernet.htm
I bought the 128meg stick for $46.00 about a month ago and I am running it at 133 and cas2 I know it's not rated for cas2 but in Unreal Tourny and CS I have had no lockups or anything.
MSI K7T Pro
Duron700@700
Voodoo3 2K@170mhz.
128megs Accessmicro's zeus ram@133 cas2
64megs Infineon pc100 also@133 cas2
I bought 2 128 MB sticks before Thanksgiving, and it runs awesome!
Celeron 300a @ 450MHz
Abit BX6 Mobo
Voodoo 4
Maxtor 40GB 7200 RPM on Promise ATA100 controller.
"Don't touch it - it's eeeeeeeeeeeeeeeeeeeeeevil!"
are you talking about the cheap ones? or the tinybga?
This is the cheapest stuff at AccessMicro. You can get the 128MB stick for around $45. Any others? Compatability problems? Anyone try higher than 133Mhz?
[email protected]
256MB Crucial PC133 CAS2
ATI Radeon 64MB TIVO @ 205/205
Lian Li PC-60 Aluminum Case
Enermax EG451-VE
and...
A Intel Pro/100+ NIC...get yours here: http://home.adelphia.net/~ivanlau/ethernet.htm
Using two 128MB sticks on my Abit KA7, a notoriously picky mobo when it comes to RAM.
I haven't had a single problem. Works great!
------------
-NU2K
works fine for me. Then again, I'm still running a K6-2 400 w/ 100 MHZ bus on an Asus P5A mobo
i got one stick of pny and one stick of accessmicro stuff, when i bump my bus speed to 115 mhz the ram runs at 143 mhz no problem
I bought a stick of the 128MB 133mhz SDRAM back when it was going for $95 (it was a good deal at the time!). I had problems with system stability and lock ups. Checked my BIOS and found that it was being reported as PC100, not PC133, even though that's what I ordered and what was listed on the packing slip. Had to get a RA# and send it back to them. They sent me out a new stick and so far, no problems. Other than having the hassle of sending it back and paying the shipping to get it there (return shipping for the replacement was on them), I have no complaints. I just wish I had known that prices were going to plummet right after I bought it!![]()
exmike, did you have it at 143 Cas3? Or Cas2?
[email protected]
256MB Crucial PC133 CAS2
ATI Radeon 64MB TIVO @ 205/205
Lian Li PC-60 Aluminum Case
Enermax EG451-VE
and...
A Intel Pro/100+ NIC...get yours here: http://home.adelphia.net/~ivanlau/ethernet.htm


i bought one 128 meg chip and one 64 meg pc 133..
i have a celery 366 slot 1 on an abit ka7 i think. It's the one with the built on sound card...
have no idea what cas2 or cas3 is.... but everythign runs smoothly..
i have a ram cocktail too....
--==--
Why is this posted here and not in the overclocking forum?
[___
]
(O lllllll O)
[]==O=[]
Because the RAM is a hot deal. This is the cheapest stuff you can find. What has been holding some people back though (including me) is its unknown overclocking potential.
If we get plenty of reports of successful overclocks of 138 Cas2 to 143 Cas2, this deal would be that much hotter.
[email protected]
256MB Crucial PC133 CAS2
ATI Radeon 64MB TIVO @ 205/205
Lian Li PC-60 Aluminum Case
Enermax EG451-VE
and...
A Intel Pro/100+ NIC...get yours here: http://home.adelphia.net/~ivanlau/ethernet.htm
Bookmarks