Results 1 to 3 of 3

Thread: code 30 help

  1. 06-23-2000, 12:02 AM #1
    Nanotech9
    Nanotech9 is offline
    Vice Admiral Nanotech9's Avatar
    Join Date
    Feb 2000
    Location
    Gone Wheeling!
    Posts
    4,409

    Post

    Try swapping slots with the two cards. Basically, you don't want the SCSI and Live! sharing an IRQ. Also, disable SB16 Emulation in the Device Manager. That should free up an IRQ if your low on resources. Also, try changing the I/O or memory ranges of the Live! card in the Device M.

    Check for chipset drivers for your motherboard too, and update the drivers for your SCSI card and the Live!.
    Reply With Quote Reply With Quote
  2. 06-23-2000, 03:30 AM #2
    cb4800
    cb4800 is offline
    Lieutenant Junior Grade
    Join Date
    Apr 2000
    Posts
    66

    Question

    While I had my sound blaster live value sent back to be replaced, I installed a 12x S&F CDR. It connects to the included SCSI card. Today I got my sound blaster card back and am having problems. The SCSI card shows a code 30 error under device manager when the sound card is installed. They are both using irq 11 and I don't know what the problem is. I have removed the cards many times with no luck in solving the conflict.
    Reply With Quote Reply With Quote
  3. 06-23-2000, 09:12 PM #3
    cb4800
    cb4800 is offline
    Lieutenant Junior Grade
    Join Date
    Apr 2000
    Posts
    66

    Post

    Nanotech9,

    You rule! I disabled SB16 Emulation in the Device Manager and then put the SCSI card back in and now it is working. What did I lose by disabling the SB16 Emulation?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules